Home » Products » Material Handling » Goods Lifts » Hydraulic Goods Lift – Dual Mast ND-GL-HDM Series

Hydraulic Goods Lift – Dual Mast ND-GL-HDM Series

Model : ND-GL-SDM

Nido single mast hydraulic goods lift is widely used to transfer material from one floor to another. It is to be installed with wall support at the one side and rest 2 sides can be used for loading & unloading purpose.

  • UDL Capacity: upto 2000 kgs
  • Platform Size: Maximum 2000*2500 mm
  • Lift Height: Available upto 10 mtrs

  • Multiple Entry & Exit Option
  • Safety against loose material falling during operation
  • 3 phase Powerpack with AC Motor Control Panel
  • High Grade Material
  • Optimum Efficiency

Description

  • Travel up to 10 mtrs.
  • Railing on platform provides safety against loose materials falling during operation.
  • Suitable for warehouses, workshop in automotive, container loading and unloading.
  • Convenient installations and maintenance, appearance, safe and convenient operation.

CONTACT US FOR MORE INFO

Specification

Model ND-GL-HDM
UDL Capacitykgupto 2000
Cabin Size (Outer) (W*D*H)mm1150*1800*1900
Lift Heightmm4800
Lowered Heightmm200
Travel Heightmm5000
CabinCabin size as above. Fully closed with MS sheet, one width side collapsible door with limit switch interlocking.
Power Supply415VAC, 3Ph, 50Hz
Loading/UnloadingmmFrom 1150mm at ground, unloading at same side 1st floor at 4800 mm
No. of StopsG+1
Overall Space Requiredmm1600*1850
Motor RatingHP3
Power Pack LocationOutside of the platform, nearerst to the equipment
Lifting Speedmm/s50-60
Color of the EquipmentGolden Yellow, RAL 1003
Self Weightkg1200
Other Technical Details
A.Mechanical
1. Constructed in good quality robust steel
2. MS Checkered platform
3. Mechanical Stopper with rest pad provided
B. Hydraulic Component
ComponentMake
Hydraulic Tank, Cylinder, Hose Burst ValveNIDO
Solenoid Valve, Manifold BlockHydac
Gear PumpDowty
Suction Strainer / Return Line FilterHydroline
Bell Housing / CouplingHyzen
Pressure Gauge / Oil Level IndicatorWika/Hydroline
Hydrulic Hoses-Maximum 3 mtr longSony/Parker
FittingsStandard
C. Electrical Component: (Applicable for Electro-Hydraulic Component Only)
ComponentsMake
Electric MotorSiemens/ABB/CG
Contactor/Over Load RelaysSiemens/BCH/TC
MCB/MPCB/IndicatorsSiemens
Panel BoxNIDO
Push Buttons/Limit SwitchesTeknik
FittingsStandard
Cables - Maximum 5 mtrs longPolycab/Avanti
ConnectorsPhoenix/Connectwell/Elemek

Videos

Options Available

  • Flameproof controls are available
  • Can be constructed in SS 304/316