Home » Products » Material Handling » Forklifts & Reach Trucks » Articulating Forklift

Articulating Forklift

Model: ND-AF Series

The Bendi Electric Narrow Aisle trucks are available with three-stage masts, with lift heights up to 12.5M. Four-stage masts also are available on all 4-wheel models for lift heights up to 7.92M, giving the Bendi high stacking ability, while allowing the low mast height necessary to work in highway trailers or travel through low doorways.
The Bendi electric has a 48 Volt AC electrical control system with the latest in AC control and motor technology. Efficient use of battery power results in longer run times between charges and lower operating temperatures.

  • Capacity: 1361/2495 kg
  • Load Centre: 600 mm
  • Power Source: 48V Battery

  • Ergonomic design for exceptional operator comfort & safety
  • Integral side shifter makes placing & picking loads effortless
  • DuraSteer™ front wheel hydraulic steering provides smooth, reliable, long lastign steering control
  • Land active control provides enhanced traction control based on steering angle
  • Creep speed mode adds enhanced control when handling loads at high elevations or while training operator
  • High visibility masts allows optimum safety & control
  • AC traction & hydraulic ensure mimimal maintenance & high efficiency
  • High efficiency curtis AC controller provide trouble free operation
  • Interactive LCD status mode monitor
  • 48V electrical system, Large capacity battery compartment
  • Optional cold storage conditioned to -22ºF (-30ºC)

 

Description

B3/30

Bendi Front Wheel Drive Articulating VNA Warehouse Forklift

  • The Bendi model B3/30AC works in aisles as narrow as 1.8M has a basic capacity of 1361 kg at 600mm load center and has lift heights available to 9.14 mtr. 
  • The Bendi B3/30AC is a 3-wheel articulating forklift with a single poly front drive tire and solid rubber rear tires.
  • Front articulation of 200°, narrow mast and a compact front end allow easy stacking in Very Narrow Aisles.
  • The B3/30AC can work inside and outside on paved surfaces. The B3/30AC does all the jobs of a reach truck in aisles at least 1 mtr smaller.

Exceptional Performance & Maneuverability 

  • Equipped with the LandActive control and the Landoll DuraSteerTM front wheel hydraulic steering, the B3/30AC provides exceptional control and makes load placement and retrieval superior to the competition.

Minimizes Material Handling Productivity

  • The versatile Bendi B3/30AC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations.
  • The unique design allows operators to use it as a counterbalance truck indoors or out, while operating in very narrow aisles in your warehouse, replacing reach trucks that require much wider aisles.
  • All tires on the Bendi B3/30AC are the 457mm diameter and the truck has great underclearance for avoiding floor obstructions.

*Based on 1200mm long x 1000mm wide load.

B55AC

Bendi Rear Wheel Drive High Capacity, High Lift Narrow Aisle Multipurpose Electric Articulating Forklift

  • The Bendi model B55AC works in aisles as narrow as 2.13 mtr. The B55AC high volume model has a basic capacity of 2495 kg at 600mm load center and has lift heights available to 9.14 mtr.
  • The B55AC model is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires.
  • Excellent traction, braking, and power enable climbing steep ramps with loads.
  • Three or four stage masts are available. The B55AC can work inside and outside on paved surfaces and have a floating front axle, allowing the truck to ride smoothly over uneven floors and do the jobs of reach and counterbalanced trucks but with much heavier loads and in much narrower aisles.

Exceptional Performance and Maneuverability

  • Equipped with the Landoll DuraSteerTM front wheel hydraulic steering, the B55AC provides exceptional control and makes load placement and retrieval superior to the competition.

Maximizes Material Handling Productivity

  • The versatile Bendi B55AC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations.
  • The unique design allows operators to use it as a counterbalance truck indoors or out, while operating in narrow aisles in your warehouse, replacing reach trucks that require much wider aisles.
  • The Bendi B55AC has large diameter tires and the truck has great underclearance for avoiding floor obstructions. One truck can go from inside the dock to the rack, eliminating staging and additional operators and support forklifts.

*Based on 48” (1200mm) long x 40” (1000mm) wide load.

CONTACT US FOR MORE INFO

Specification

Model B3/30AC
Capacitykg1361
Load Centermm600
Power SourceV48V Battery
Weight with Batterykg5818
Travel Speed Loadedkph8.9
Travel Speed Unloadedkph9.7
Lift Speed Loadedmpm27.4
Lift Speed Unloadedmpm33.5
Lowering Speed Loadedmpm30.5
Lowering Speed Unloadedmpm27.4
Mast TiltDegrees1/2
Lost Load Centermm361
Wheelbasemm1768
Overall Length to Face of Forksmm2791
Underclearancemm76
Cab Floor Heightmm787
Sear Heightmm1295
Overhead Guard Heightmm2209
Chassis Widthmm1138
Greadeability Loaded%5
Greadeability Unloaded%8
Hydraulic Motor RatingkW12
Drive Motor Rating - Single FrontkW5.1
Wheel Size - Front 1 Eachmm457*178
Wheel Size - Rear 2 Eachmm457*178
Traction Control TypeAC Curtis
Hydraulic Control TypeAC Curtis
Front ArticulationDegrees200
ModelB55AC
Capacitykg2495
Load Centermm600
Power SourceV48V Battery
Weight with Batterykg7705
Travel Speed Loadedkph10.5
Travel Speed Unloadedkph11.3
Lift Speed Loadedmpm27.4
Lift Speed Unloadedmpm33.4
Lowering Speed Loadedmpm30.5
Lowering Speed Unloadedmpm27.4
Mast Tilt - FWD/RWD (upto 293°)Degrees3/3
Mast Tilt - FWD/RWD (294° to 360°)Degrees1/2
Carriage Tilt - FWD/RWDDegreesN/A
Lost Load Centermm310
Wheelbasemm175
Overall Length to Face of Forksmm287
Underclearancemm7.6
Floor Heightmm79
Overhead Guard Heightmm226
Overhead Guard Widthmm117
Chassis Widthmm142
Fork Carriage Widthmm104
Fork Lengthcm101
Battery Compartment Heightcm48
Right Aisle Stacking Aislecm213
Intersecting Aislecm289
Greadeability Loaded%15
Greadeability Unloaded%15
Hydraulic Motor Rating - Contunuous Duty RatingType/kWhAC/16.8
Traction Motor RatingType/kWhAC/7.5 ea - 15 Total
Tracton ControllerAC
Hydraulic ControllerAC
Wheel Size - Front (2 Each Poly) Dia.*Facecm36*20
Wheel Size - Front (2 Each Rubber) Dia.*Facecm46*23

Videos

Options Available